轻钢别墅涂层法的施工的第一步是除锈。优质的涂层依赖于彻底的除锈。所以要求高的涂层一般多用喷砂喷丸除锈，露出金属的光泽，除去所有的锈迹和油污。现场施工的涂层可用手工除锈。涂层的选择要考虑周围的环境。不同的涂层对不同的腐蚀条件有不同的耐受性。无法在管状构件的内壁施工，因而管状构件两端必须做气密性封闭，以使内壁不会腐蚀。这种工艺的优点是对构件尺寸适应性强，构件形状尺寸几乎不受限制。大到如葛洲坝的船闸也是用这种方泥杆 保定古筝 塑料增韧剂 拱形护坡模具 保定空调维修  托辊生产线法施工的。轻钢别墅另一个优点则是这种工艺的热影响是局部的，受约束的，因而不会产生热变形。与热浸锌相比，这种方法的工业化程度较低，喷砂喷铝（锌）的劳动强度大，质量也易受操作者的情绪变化影响。也较多采用热浸锌防腐蚀。热浸锌的首道工序是酸洗除锈
The first step in the construction of the coating method for light steel villas is rust removal. High quality coatings rely on thorough rust removal. So coatings with high requirements generally use sandblasting and shot blasting to remove rust, exposing the luster of the metal, and removing all rust and oil stains. The coating for on-site construction can be manually derusted. The selection of coating should consider the surrounding environment. Different coatings have different resistance to different corrosion conditions. It is not possible to construct on the inner wall of the tubular component, so both ends of the tubular component must be airtight sealed to prevent corrosion of the inner wall. The advantage of this process is its strong adaptability to component dimensions, and the shape and size of components are almost unrestricted. Shiplocks as large as Gezhouba were also constructed using this method. Another advantage of light steel villas is that the thermal impact of this process is localized and constrained, thus avoiding thermal deformation. Compared with hot-dip galvanizing, this method has a lower degree of industrialization, and sandblasting aluminum (zinc) has a higher labor intensity, and the quality is also easily affected by the operator's emotional changes. Hot dip galvanizing is also commonly used for corrosion prevention. The first process of hot dip galvanizing is acid washing and rust removal